Welcome to the New Web Control Center

Your Atomic Voyage Clock now comes with the latest GEN3 firmware pre-installed.

No firmware upgrade is required for newly purchased clocks.

The Web Control Center allows you to customize your clock from any device connected to the same Wi-Fi network, including:

• iPhone
• iPad
• Mac
• Windows PC

Getting Started

Step 1 — Connect to Your Clock’s Wi-Fi Hotspot

Open the Wi-Fi settings on your phone.

You can also press the D button on the clock (the far-right button) to open the Info screen and check the clock’s Wi-Fi name.

Connect to:

AV-IPS-XXXXXX

Password:

12345678

Step 2 — Connect Your Clock to Your Home Wi-Fi

After your phone connects to the clock’s Wi-Fi hotspot, the setup page may open automatically.

If it does not open, open a browser and enter:

192.168.4.1

On the setup page:

1. Click Scan WiFi to discover available networks.
2. Select your home Wi-Fi network.
3. Enter your Wi-Fi password.
4. Click Connect.

Important:

192.168.4.1 is only used during the initial setup stage while your phone is connected to the clock’s temporary Wi-Fi hotspot.

After your clock connects to your home Wi-Fi network, do not use 192.168.4.1 again.

Step 3 — Open the Web Control Center

After the Wi-Fi connection is complete:

1. Press the D button on the clock to open the Info screen.
2. Find the clock’s local IP address. The IP address may look like: 192.168.x.xx
3. On any device connected to the same Wi-Fi network, open a browser.
   
4. Enter the clock’s IP address.

The Web Control Center will open.

From now on, any phone, tablet, or computer connected to the same Wi-Fi network can access and customize your clock through this address.

Control Center Overview

The Control Center features a clean, dark-themed interface with a left navigation panel and main content area. The top bar displays your device information, including Device ID, IP address, and firmware version.

Navigation Menu

Use the left sidebar to jump to key sections:

• System - WiFi, display, RGB lighting, and device controls
  
• Settings - Weather, countdown, POSIX Timezone 
• Images - Browse and download images from the online market
• Faces - Download complete clock-face designs

Wi-Fi Configuration

Connect your Atomic Voyage clock to a wireless network:

1. Click Scan WiFi to discover available networks.
2. Select a network from the list (signal strength is shown).
3. Enter the Wi-Fi password.
4. Click Connect.

Tip: Saved networks appear at the top for quick reconnection.

Display

Switch modes with a single click:

Additional options:

• Switch Style — Cycle through clock face styles

• 12/24 Hour — Toggle time format
  

RGB Light Control

Customize ambient RGB lighting:

Color Wheel

• Click or drag to pick any color.

• Changes apply instantly.
  

Quick Colors

• Tap a preset: Red / Orange / Yellow / Green / Cyan / Blue / Purple / Pink / White
  
  

Light Modes

• Rainbow — Flowing rainbow effect

• Aurora — Aurora borealis effect

• Static — Fixed single color
  
  

Controls

• Light Switch — On/Off

• Brightness — 0-255

Countdown

Create a countdown to a future event:

1. Enter target time: Year (YYYY), Month (MM), Day (DD), Hour (HH), Minute (MM)

2. Click Save and Display
   

Auto display format

• ≥ 1 day → DAY

• < 1 day → HRS

• < 1 hour → MIN

• < 1 minute → SEC

Limit: Maximum countdown duration is 99 days.

POSIX Timezone

Set the time zone using the dropdown menu:

1. Select your local time zone from the dropdown list.
2. Click Save Timezone to apply the setting.

Images

Market

Browse and download images for your Atomic Voyage clock Album mode:

1. Go to Images → Market

2. Browse the gallery (images are shown in a grid)

3. Hover an image to preview details and actions

4. Click Download

5. Choose a slot position (1–6)