How to Easily Set Up and Use Your Atomic Voyage WFD II

Congratulations on your new Atomic Voyage WFD2! This compact, intuitive device is designed to seamlessly integrate into your daily life, providing accurate time synchronization and flexible control options. Here's a simple guide to getting started.

Initial Setup

1. Powering Your Device:

   • Connect your WFD2 using the provided USB data cable to a power source.

2. Wi-Fi Connection:

   • Turn on your phone’s Wi-Fi settings.

   • Select the network named EM_WFD2_XXXXX (no password needed).

   • After connecting, wait briefly for your browser to open the setup page automatically.

     
     

Connecting to Your Home Wi-Fi

1. Access Wi-Fi Settings:

   • Tap the Wi-Fi settings icon on your phone or tablet.

2. Refresh Network List:

   • Tap the refresh icon at the top right corner to see available networks.

3. Connect to Your Wi-Fi:

   • Select your Wi-Fi network, enter your password, and connect.

   • Your device will confirm the connection by displaying “Connected” along with the assigned IP address (e.g., 192.168.XX.XX).

     
     

Configuring via Web Browser

• On a computer connected to the same Wi-Fi network:

  • Open your browser and enter the WFD2's IP address (e.g., 192.168.XX.XX).

  • Access the WFD2 configuration page to adjust your settings as needed.

Manual Time Setting

1. Long-press Button B to start manual time setting mode.

2. Use Button A to decrease and Button C to increase values.

3. Press Button B to confirm each entry, setting Year → Month → Day → Weekday → Hour → Minute → Second.

If you make an error, restart the manual setting from the beginning.

Button Functions Quick Guide

• Button A:

  • Short Press: Switch spectrum modes

• Button B:

  • Long Press: Enter manual time setting mode

• Button C:

  • Short Press: Adjust brightness

Resetting Wi-Fi

• Turn off your WFD2 by unplugging it.

• Press and hold Button B while reconnecting power.

• Release the button after three beeps to complete the Wi-Fi reset.

🖥 How to Display Your PC’s CPU, GPU & RAM Usage on WFD2

WFD2 can display real-time system performance data from your Windows PC — including CPU, GPU, and RAM usage.

The setup is simple and does not require any third-party software.

Step 1: Connect WFD2 to Your PC

Use a USB cable to connect your WFD2 device to your Windows computer.

Make sure:

• The device is powered on

• The USB cable is securely connected

Step 2: Download the Official EleksWFD Tool

1. Open your WFD2 settings page in a browser

2. Navigate to the System tab

3. Locate EleksWFD Tool

4. Click Download

Install and open the tool on your Windows PC.

Compatible with Windows 10 and Windows 11.

Step 3: Launch the Tool

Once installed:

• Open the EleksWFD Tool

• Select your connected device (if prompted)

• The system monitoring data will begin displaying automatically

Your CPU, GPU, and RAM usage will now appear on your WFD2 screen in real time.

Important Notes

• The EleksWFD Tool is officially developed by Atomic Voyage.

• It runs locally on your PC.

• No third-party software is required.

• No personal data is collected or uploaded.

If Windows shows a security prompt during installation, please allow the program to run.

Troubleshooting

If system data does not appear:

• Ensure the USB cable is connected properly

• Make sure the EleksWFD Tool is running

• Restart the software if necessary

• Update your graphics drivers if GPU data is missing

Warranty Information

Your Atomic Voyage WFD2 comes with a one-year warranty covering non-human-caused issues. Detailed warranty and non-warranty conditions are clearly outlined in the provided documentation.

Enjoy your Atomic Voyage WFD2, designed for clarity, precision, and simplicity in your everyday use!